MySQL高可用方案MHA的部署和原理 - iVictor - 博客园

标签: | 发表时间:2018-09-27 17:34 | 作者:
出处:http://www.cnblogs.com

MHA(Master High Availability)是一套相对成熟的MySQL高可用方案,能做到在0~30s内自动完成数据库的故障切换操作,在master服务器不宕机的情况下,基本能保证数据的一致性。

 

它由两部分组成:MHA Manager(管理节点)和MHA Node(数据节点)。其中,MHA Manager可以单独部署在一台独立的机器上管理多个master-slave集群,也可以部署在一台slave上。MHA Node则运行在每个mysql节点上,MHA Manager会定时探测集群中的master节点,当master出现故障时,它自动将最新数据的slave提升为master,然后将其它所有的slave指向新的master。

 

在MHA自动故障切换过程中,MHA试图保存master的二进制日志,从而最大程度地保证数据不丢失,当这并不总是可行的,譬如,主服务器硬件故障或无法通过ssh访问,MHA就没法保存二进制日志,这样就只进行了故障转移但丢失了最新数据。可结合MySQL 5.5中推出的半同步复制来降低数据丢失的风险。

 

MHA软件由两部分组成:Manager工具包和Node工具包,具体说明如下:

MHA Manager:

1. masterha_check_ssh:检查MHA的SSH配置状况

2. masterha_check_repl:检查MySQL的复制状况

3. masterha_manager:启动MHA

4. masterha_check_status:检测当前MHA运行状态

5. masterha_master_monitor:检测master是否宕机

6. masterha_master_switch:控制故障转移(自动或手动)

7. masterha_conf_host:添加或删除配置的server信息

8. masterha_stop:关闭MHA

 

MHA Node:

save_binary_logs:保存或复制master的二进制日志

apply_diff_relay_logs:识别差异的relay log并将差异的event应用到其它slave中

filter_mysqlbinlog:去除不必要的ROLLBACK事件(MHA已不再使用这个工具)

purge_relay_logs:消除中继日志(不会堵塞SQL线程)

 

另有如下几个脚本需自定义:

1. master_ip_failover:管理VIP

2. master_ip_online_change:

3. masterha_secondary_check:当MHA manager检测到master不可用时,通过masterha_secondary_check脚本来进一步确认,减低误切的风险。

4. send_report:当发生故障切换时,可通过send_report脚本发送告警信息。

 

集群信息

角色                             IP地址                 ServerID      类型

Master                         192.168.244.10   1                 写入

Candicate master          192.168.244.20   2                 读

Slave                           192.168.244.30   3                 读

Monitor host                 192.168.244.40                      监控集群组

注:操作系统均为RHEL 6.7

其中,master对外提供写服务,备选master提供读服务,slave也提供相关的读服务,一旦master宕机,将会把备选master提升为新的master,slave指向新的master

 

一、在所有节点上安装MHA node

    1. 在MySQL服务器上安装MHA node所需的perl模块(DBD:mysql)

      # yum install perl-DBD-MySQL -y

    2. 在所有的节点上安装mha node

      下载地址为:https://code.google.com/p/mysql-master-ha/wiki/Downloads?tm=2

      由于该网址在国内被墙,相关文件下载后,放到了个人网盘中,http://pan.baidu.com/s/1boS31vT,有需要的童鞋可自行下载。

      # tar xvf mha4mysql-node-0.56.tar.gz

      # cd mha4mysql-node-0.56

      # perl Makefile.PL  

Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: inc /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at inc/Module/Install/Can.pm line 6.
BEGIN failed--compilation aborted at inc/Module/Install/Can.pm line 6.
Compilation failed in require at inc/Module/Install.pm line 283.
Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: inc /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at inc/Module/Install/Makefile.pm line 4.
BEGIN failed--compilation aborted at inc/Module/Install/Makefile.pm line 4.
Compilation failed in require at inc/Module/Install.pm line 283.
Can't locate ExtUtils/MM_Unix.pm in @INC (@INC contains: inc /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at inc/Module/Install/Metadata.pm line 349.

     通过报错可以看出,是相关依赖包没有安装。

     # yum install perl-ExtUtils-MakeMaker -y

     # perl Makefile.PL  

*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
Can't locate CPAN.pm in @INC (@INC contains: inc /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at inc/Module/AutoInstall.pm line 277.

    # yum install perl-CPAN -y

    # perl Makefile.PL

*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- DBI        ...loaded. (1.609)
- DBD::mysql ...loaded. (4.013)
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Writing Makefile for mha4mysql::node

     # make 

     # make install

    至此,MHA node节点安装完毕,会在/usr/local/bin下生成以下脚本文件

# ll /usr/local/bin/
total 44
-r-xr-xr-x 1 root root 16367 Jul 20 07:00 apply_diff_relay_logs
-r-xr-xr-x 1 root root  4807 Jul 20 07:00 filter_mysqlbinlog
-r-xr-xr-x 1 root root  8261 Jul 20 07:00 purge_relay_logs
-r-xr-xr-x 1 root root  7525 Jul 20 07:00 save_binary_logs

    

二、在Monitor host节点上部署MHA Manager

     # tar xvf mha4mysql-manager-0.56.tar.gz 

     # cd mha4mysql-manager-0.56

     # perl Makefile.PL

*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- DBI                   ...loaded. (1.609)
- DBD::mysql            ...loaded. (4.013)
- Time::HiRes           ...missing.
- Config::Tiny          ...missing.
- Log::Dispatch         ...missing.
- Parallel::ForkManager ...missing.
- MHA::NodeConst        ...missing.
==> Auto-install the 5 mandatory module(s) from CPAN? [y] y
*** Dependencies will be installed the next time you type 'make'.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Warning: prerequisite Config::Tiny 0 not found.
Warning: prerequisite Log::Dispatch 0 not found.
Warning: prerequisite MHA::NodeConst 0 not found.
Warning: prerequisite Parallel::ForkManager 0 not found.
Warning: prerequisite Time::HiRes 0 not found.
Writing Makefile for mha4mysql::manager

     # make

     # make install

    执行完毕后,会在/usr/local/bin下新增以下几个文件  

# ll /usr/local/bin/
total 40
-r-xr-xr-x 1 root root 1991 Jul 20 00:50 masterha_check_repl
-r-xr-xr-x 1 root root 1775 Jul 20 00:50 masterha_check_ssh
-r-xr-xr-x 1 root root 1861 Jul 20 00:50 masterha_check_status
-r-xr-xr-x 1 root root 3197 Jul 20 00:50 masterha_conf_host
-r-xr-xr-x 1 root root 2513 Jul 20 00:50 masterha_manager
-r-xr-xr-x 1 root root 2161 Jul 20 00:50 masterha_master_monitor
-r-xr-xr-x 1 root root 2369 Jul 20 00:50 masterha_master_switch
-r-xr-xr-x 1 root root 5167 Jul 20 00:50 masterha_secondary_check
-r-xr-xr-x 1 root root 1735 Jul 20 00:50 masterha_stop

 

三、配置SSH登录无密码验证

    1. 在manager上配置到所有Node节点的无密码验证

      # ssh-keygen

      一路按“Enter”

     # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

     # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

     # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

    2. 在Master(192.168.244.10)上配置

    # ssh-keygen

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

    3. 在Candicate master(192.168.244.20)上配置     

    # ssh-keygen

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

     4. 在Slave(192.168.244.30)上配置     

    # ssh-keygen

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

    # ssh-copy-id -i /root/.ssh/id_rsa.pub [email protected]

 

四、搭建主从复制环境

     1. 在Master上执行备份

     # mysqldump --master-data=2 --single-transaction -R --triggers -A > all.sql

     其中,-R是备份存储过程,--triggers是备份触发器 -A代表全库

     2. 在Master上创建复制用户

mysql> grant replication slave on *.* to 'repl'@'192.168.244.%' identified by 'repl';
Query OK, 0 rows affected (0.09 sec)

    3. 查看备份文件all.sql中的CHANGE MASTER语句

      # head -n 30 all.sql

-- CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000002', MASTER_LOG_POS=120;

     4. 将备份文件复制到Candicate master和Slave上

     # scp all.sql 192.168.244.20:/root/

     # scp all.sql 192.168.244.30:/root/

     5. 在Candicate master上搭建从库

     # mysql < all.sql 

     设置复制信息

mysql> CHANGE MASTER TO
    -> MASTER_HOST='192.168.244.10',
    -> MASTER_USER='repl',
    -> MASTER_PASSWORD='repl',
    -> MASTER_LOG_FILE='mysql-bin.000002',
    -> MASTER_LOG_POS=120;
Query OK, 0 rows affected, 2 warnings (0.19 sec)

mysql> start slave;
Query OK, 0 rows affected (0.02 sec)

mysql> show slave status\G

       6. 在Slave上搭建从库

       7. slave服务器设置为read only

mysql> set global read_only=1;
Query OK, 0 rows affected (0.04 sec)

       8. 在Master中创建监控用户

mysql> grant all privileges on *.* to 'monitor'@'%' identified by 'monitor123';
Query OK, 0 rows affected (0.07 sec)

 

五、 配置MHA

     1. 在Monitor host(192.168.244.40)上创建MHA工作目录,并且创建相关配置文件

     # mkdir -p /etc/masterha

     # vim /etc/masterha/app1.cnf

[server default]
manager_log=/masterha/app1/manager.log          //设置manager的日志
manager_workdir=/masterha/app1           //设置manager的工作目录
master_binlog_dir=/var/lib/mysql                  //设置master默认保存binlog的位置,以便MHA可以找到master的日志
master_ip_failover_script= /usr/local/bin/master_ip_failover    //设置自动failover时候的切换脚本
master_ip_online_change_script= /usr/local/bin/master_ip_online_change  //设置手动切换时候的切换脚本
user=monitor               // 设置监控用户
password=monitor123         //设置监控用户的密码
ping_interval=1         //设置监控主库,发送ping包的时间间隔,默认是3秒,尝试三次没有回应的时候进行自动failover
remote_workdir=/tmp     //设置远端mysql在发生切换时binlog的保存位置
repl_user=repl          //设置复制环境中的复制用户名
repl_password=repl    //设置复制用户的密码
report_script=/usr/local/bin/send_report    //设置发生切换后发送的报警的脚本
secondary_check_script= /usr/local/bin/masterha_secondary_check -s 192.168.244.20 -s 192.168.244.30 --user=root --master_host=192.168.244.10 --master_ip=192.168.244.10 --master_port=3306  //一旦MHA到master的监控之间出现问题,MHA Manager将会判断其它两个slave是否能建立到master_ip 3306端口的连接
shutdown_script=""      //设置故障发生后关闭故障主机脚本(该脚本的主要作用是关闭主机防止发生脑裂)
ssh_user=root           //设置ssh的登录用户名

[server1]
hostname=192.168.244.10
port=3306

[server2]
hostname=192.168.244.20
port=3306
candidate_master=1   //设置为候选master,如果设置该参数以后,发生主从切换以后将会将此从库提升为主库,即使这个主库不是集群中最新的slave
check_repl_delay=0   //默认情况下如果一个slave落后master 100M的relay logs的话,MHA将不会选择该slave作为一个新的master,因为对于这个slave的恢复需要花费很长时间,通过设置check_repl_delay=0,MHA触发切换在选择一个新的master的时候将会忽略复制延时,这个参数对于设置了candidate_master=1的主机非常有用,因为它保证了这个候选主在切换过程中一定是最新的master

[server3]
hostname=192.168.244.30
port=3306

       注意:

      1> 在编辑该文件时,后面的注释切记要去掉,MHA并不会将后面的内容识别为注释。

      2> 配置文件中设置了master_ip_failover_script, secondary_check_script,master_ip_online_change_script,report_script,对应的文件见文章末 尾。

      2. 设置relay log清除方式(在每个Slave上)

mysql> set global relay_log_purge=0;
Query OK, 0 rows affected (0.00 sec)

      MHA在发生切换过程中,从库在恢复的过程中,依赖于relay log的相关信息,所以我们这里要将relay log的自动清楚设置为OFF,采用手动清楚relay log的方式。

      在默认情况下,从服务器上的中继日志会在SQL线程执行完后被自动删除。但是在MHA环境中,这些中继日志在恢复其它从服务器时可能会被用到,因此需要禁用中继日志的自动清除。改为定期手动清除SQL线程应用完的中继日志。

      在ext3文件系统下,删除大的文件需要一定的时间,这样会导致严重的复制延迟,所以在Linux中,一般都是通过硬链接的方式来删除大文件。

      3. 设置定期清理relay脚本

         MHA节点中包含了purge_relay_logs脚本,它可以为relay log创建硬链接,执行set global relay_log_purge=1,等待几秒钟以便SQL线程切换到新的中继日志,再执行set global relay_log_purge=0。

         下面看看脚本的使用方法:

         # purge_relay_logs --user=monitor --password=monitor123 -disable_relay_log_purge --workdir=/tmp/

2017-04-24 20:27:46: purge_relay_logs script started.
 Found relay_log.info: /var/lib/mysql/relay-log.info
 Opening /var/lib/mysql/mysqld-relay-bin.000001 ..
 Opening /var/lib/mysql/mysqld-relay-bin.000002 ..
 Opening /var/lib/mysql/mysqld-relay-bin.000003 ..
 Opening /var/lib/mysql/mysqld-relay-bin.000004 ..
 Opening /var/lib/mysql/mysqld-relay-bin.000005 ..
 Opening /var/lib/mysql/mysqld-relay-bin.000006 ..
 Executing SET GLOBAL relay_log_purge=1; FLUSH LOGS; sleeping a few seconds so that SQL thread can delete older relay log files (if i
t keeps up); SET GLOBAL relay_log_purge=0; .. ok.2017-04-24 20:27:50: All relay log purging operations succeeded.

        其中,

        --user:mysql用户名

        --password:mysql用户的密码

        --host: mysqlserver地址

        --workdir:指定创建relay log的硬链接的位置,默认的是/var/tmp。由于系统不同分区创建硬链接文件会失败,故需要指定具体的硬链接的位置。

        --disable_relay_log_purge:默认情况下,如果relay_log_purge=1,则脚本会直接退出。通过设置这个参数,该脚本会首先将relay_log_purge设置为1,清除掉relay log后,再将该参数设置为0。

        设置crontab来定期清理relay log

        MHA在切换的过程中会直接调用mysqlbinlog命令,故需要在环境变量中指定mysqlbinlog的具体路径。

        # vim /etc/cron.d/purge_relay_logs

0 4 * * * /usr/local/bin/purge_relay_logs --user=monitor --password=monitor123 -disable_relay_log_purge --workdir=/tmp/ >> /tmp/purge
_relay_logs.log 2>&1

       注意:最好是每台slave服务器在不同时间点执行该计划任务。

      4. 将mysqlbinlog的路径添加到环境变量中

 

六、 检查SSH的配置

       在Monitor host上执行

       # masterha_check_ssh --conf=/etc/masterha/app1.cnf

Wed Jul 20 14:33:36 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed Jul 20 14:33:36 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Wed Jul 20 14:33:36 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Wed Jul 20 14:33:36 2016 - [info] Starting SSH connection tests..
Wed Jul 20 14:33:51 2016 - [debug] 
Wed Jul 20 14:33:36 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.10:22) to [email protected](192.168.244.20:22)..
Wed Jul 20 14:33:48 2016 - [debug]   ok.
Wed Jul 20 14:33:48 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.10:22) to [email protected](192.168.244.30:22)..
Wed Jul 20 14:33:50 2016 - [debug]   ok.
Wed Jul 20 14:33:55 2016 - [debug] 
Wed Jul 20 14:33:37 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.30:22) to [email protected](192.168.244.10:22)..
Wed Jul 20 14:33:49 2016 - [debug]   ok.
Wed Jul 20 14:33:49 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.30:22) to [email protected](192.168.244.20:22)..
Wed Jul 20 14:33:54 2016 - [debug]   ok.
Wed Jul 20 14:33:55 2016 - [debug] 
Wed Jul 20 14:33:36 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.20:22) to [email protected](192.168.244.10:22)..
Wed Jul 20 14:33:49 2016 - [debug]   ok.
Wed Jul 20 14:33:49 2016 - [debug]  Connecting via SSH from [email protected](192.168.244.20:22) to [email protected](192.168.244.30:22)..
Wed Jul 20 14:33:54 2016 - [debug]   ok.
Wed Jul 20 14:33:55 2016 - [info] All SSH connection tests passed successfully.

 

七、查看整个集群的状态

     在Monitor host上执行

     # masterha_check_repl --conf=/etc/masterha/app1.cnf

Wed Jul 20 14:44:30 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed Jul 20 14:44:30 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Wed Jul 20 14:44:30 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Wed Jul 20 14:44:30 2016 - [info] MHA::MasterMonitor version 0.56.
Wed Jul 20 14:44:31 2016 - [info] GTID failover mode = 0
Wed Jul 20 14:44:31 2016 - [info] Dead Servers:
Wed Jul 20 14:44:31 2016 - [info] Alive Servers:
Wed Jul 20 14:44:31 2016 - [info]   192.168.244.10(192.168.244.10:3306)
Wed Jul 20 14:44:31 2016 - [info]   192.168.244.20(192.168.244.20:3306)
Wed Jul 20 14:44:31 2016 - [info]   192.168.244.30(192.168.244.30:3306)
Wed Jul 20 14:44:31 2016 - [info] Alive Slaves:
Wed Jul 20 14:44:31 2016 - [info]   192.168.244.20(192.168.244.20:3306)  Version=5.6.31 (oldest major version between slaves) log-bin:disabled
Wed Jul 20 14:44:31 2016 - [info]     Replicating from 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 14:44:31 2016 - [info]     Primary candidate for the new Master (candidate_master is set)
Wed Jul 20 14:44:31 2016 - [info]   192.168.244.30(192.168.244.30:3306)  Version=5.6.31 (oldest major version between slaves) log-bin:disabled
Wed Jul 20 14:44:31 2016 - [info]     Replicating from 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 14:44:31 2016 - [info] Current Alive Master: 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 14:44:31 2016 - [info] Checking slave configurations..
Wed Jul 20 14:44:31 2016 - [warning]  log-bin is not set on slave 192.168.244.20(192.168.244.20:3306). This host cannot be a master.
Wed Jul 20 14:44:31 2016 - [warning]  log-bin is not set on slave 192.168.244.30(192.168.244.30:3306). This host cannot be a master.
Wed Jul 20 14:44:31 2016 - [info] Checking replication filtering settings..
Wed Jul 20 14:44:31 2016 - [info]  binlog_do_db= , binlog_ignore_db= 
Wed Jul 20 14:44:31 2016 - [info]  Replication filtering check ok.
Wed Jul 20 14:44:31 2016 - [error][/usr/local/share/perl5/MHA/MasterMonitor.pm, ln361] None of slaves can be master. Check failover configuration file or log-bin settings in my.cnf
Wed Jul 20 14:44:31 2016 - [error][/usr/local/share/perl5/MHA/MasterMonitor.pm, ln424] Error happened on checking configurations.  at /usr/local/bin/masterha_check_repl line 48.
Wed Jul 20 14:44:31 2016 - [error][/usr/local/share/perl5/MHA/MasterMonitor.pm, ln523] Error happened on monitoring servers.
Wed Jul 20 14:44:31 2016 - [info] Got exit code 1 (Not master dead).

MySQL Replication Health is NOT OK!

    报错很明显,Candicate master和Slave都没有启动log-bin,如果没有启动的话,后续就无法提升为主

    设置log-bin后,重新执行:

Wed Jul 20 15:49:58 2016 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed Jul 20 15:49:58 2016 - [info] Reading application default configuration from /etc/masterha/app1.cnf..
Wed Jul 20 15:49:58 2016 - [info] Reading server configuration from /etc/masterha/app1.cnf..
Wed Jul 20 15:49:58 2016 - [info] MHA::MasterMonitor version 0.56.
Wed Jul 20 15:49:59 2016 - [info] GTID failover mode = 0
Wed Jul 20 15:49:59 2016 - [info] Dead Servers:
Wed Jul 20 15:49:59 2016 - [info] Alive Servers:
Wed Jul 20 15:49:59 2016 - [info]   192.168.244.10(192.168.244.10:3306)
Wed Jul 20 15:49:59 2016 - [info]   192.168.244.20(192.168.244.20:3306)
Wed Jul 20 15:49:59 2016 - [info]   192.168.244.30(192.168.244.30:3306)
Wed Jul 20 15:49:59 2016 - [info] Alive Slaves:
Wed Jul 20 15:49:59 2016 - [info]   192.168.244.20(192.168.244.20:3306)  Version=5.6.31-log (oldest major version between slaves) log-bin:enabled
Wed Jul 20 15:49:59 2016 - [info]     Replicating from 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 15:49:59 2016 - [info]     Primary candidate for the new Master (candidate_master is set)
Wed Jul 20 15:49:59 2016 - [info]   192.168.244.30(192.168.244.30:3306)  Version=5.6.31-log (oldest major version between slaves) log-bin:enabled
Wed Jul 20 15:49:59 2016 - [info]     Replicating from 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 15:49:59 2016 - [info] Current Alive Master: 192.168.244.10(192.168.244.10:3306)
Wed Jul 20 15:49:59 2016 - [info] Checking slave configurations..
Wed Jul 20 15:49:59 2016 - [info] Checking replication filtering settings..
Wed Jul 20 15:49:59 2016 - [info]  binlog_do_db= , binlog_ignore_db= 
Wed Jul 20 15:49:59 2016 - [info]  Replication filtering check ok.
Wed Jul 20 15:49:59 2016 - [info] GTID (with auto-pos) is not supported
Wed Jul 20 15:49:59 2016 - [info] Starting SSH connection tests..
Wed Jul 20 15:50:17 2016 - [info] All SSH connection tests passed successfully.
Wed Jul 20 15:50:17 2016 - [info] Checking MHA Node version..
Wed Jul 20 15:50:18 2016 - [info]  Version check ok.
Wed Jul 20 15:50:18 2016 - [info] Checking SSH publickey authentication settings on the current master..
Wed Jul 20 15:50:20 2016 - [info] HealthCheck: SSH to 192.168.244.10 is reachable.
Wed Jul 20 15:50:21 2016 - [info] Master MHA Node version is 0.56.
Wed Jul 20 15:50:21 2016 - [info] Checking recovery script configurations on 192.168.244.10(192.168.244.10:3306)..
Wed Jul 20 15:50:21 2016 - [info]   Executing command: save_binary_logs --command=test --start_pos=4 --binlog_dir=/var/lib/mysql --output_file=/tmp/save_binary_logs_test --manager_version=0.56 --start_file=mysqld-bin.000002 
Wed Jul 20 15:50:21 2016 - [info]   Connecting to [email protected](192.168.244.10:22).. 
  Creating /tmp if not exists..    ok.
  Checking output directory is accessible or not..
   ok.
  Binlog found at /var/lib/mysql, up to mysqld-bin.000002
Wed Jul 20 15:50:23 2016 - [info] Binlog setting check done.
Wed Jul 20 15:50:23 2016 - [info] Checking SSH publickey authentication and checking recovery script configurations on all alive slave servers..
Wed Jul 20 15:50:23 2016 - [info]   Executing command : apply_diff_relay_logs --command=test --slave_user='monitor' --slave_host=192.168.244.20 --slave_ip=192.168.244.20 --slave_port=3306 --workdir=/tmp --target_version=5.6.31-log --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info  --relay_dir=/var/lib/mysql/  --slave_pass=xxx
Wed Jul 20 15:50:23 2016 - [info]   Connecting to [email protected](192.168.244.20:22).. 
  Checking slave recovery environment settings..
    Opening /var/lib/mysql/relay-log.info ... ok.
    Relay log found at /var/lib/mysql, up to mysqld-relay-bin.000004
    Temporary relay log file is /var/lib/mysql/mysqld-relay-bin.000004
    Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure.
 done.
    Testing mysqlbinlog output.. done.
    Cleaning up test file(s).. done.
Wed Jul 20 15:50:28 2016 - [info]   Executing command : apply_diff_relay_logs --command=test --slave_user='monitor' --slave_host=192.168.244.30 --slave_ip=192.168.244.30 --slave_port=3306 --workdir=/tmp --target_version=5.6.31-log --manager_version=0.56 --relay_log_info=/var/lib/mysql/relay-log.info  --relay_dir=/var/lib/mysql/  --slave_pass=xxx
Wed Jul 20 15:50:28 2016 - [info]   Connecting to [email protected](192.168.244.30:22).. 
  Checking slave recovery environment settings..
    Opening /var/lib/mysql/relay-log.info ... ok.
    Relay log found at /var/lib/mysql, up to mysqld-relay-bin.000008
    Temporary relay log file is /var/lib/mysql/mysqld-relay-bin.000008
    Testing mysql connection and privileges..Warning: Using a password on the command line interface can be insecure.
 done.
    Testing mysqlbinlog output.. done.
    Cleaning up test file(s).. done.
Wed Jul 20 15:50:32 2016 - [info] Slaves settings check done.
Wed Jul 20 15:50:32 2016 - [info] 
192.168.244.10(192.168.244.10:3306) (current master)
 +--192.168.244.20(192.168.244.20:3306)
 +--192.168.244.30(192.168.244.30:3306)

Wed Jul 20 15:50:32 2016 - [info] Checking replication health on 192.168.244.20..
Wed Jul 20 15:50:32 2016 - [info]  ok.
Wed Jul 20 15:50:32 2016 - [info] Checking replication health on 192.168.244.30..
Wed Jul 20 15:50:32 2016 - [info]  ok.
Wed Jul 20 15:50:32 2016 - [info] Checking master_ip_failover_script status:
Wed Jul 20 15:50:32 2016 - [info]   /usr/local/bin/master_ip_failover --command=status --ssh_user=root --orig_master_host=192.168.244.10 --orig_master_ip=192.168.244.10 --orig_master_port=3306 
Wed Jul 20 15:50:32 2016 - [info]  OK.
Wed Jul 20 15:50:32 2016 - [warning] shutdown_script is not defined.
Wed Jul 20 15:50:32 2016 - [info] Got exit code 0 (Not master dead).

MySQL Replication Health is OK.

    检查通过~

 

八、 检查MHA Manager的状态

# masterha_check_status --conf=/etc/masterha/app1.cnf 
app1 is stopped(2:NOT_RUNNING).  

        如果正常,会显示“PING_OK”,否则会显示“NOT_RUNNING”,代表MHA监控还没有开启。

 

九、开启MHA Manager监控

      # nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /masterha/app1/manager.log 2>&1 &

      其中,

      remove_dead_master_conf:该参数代表当发生主从切换后,老的主库的IP将会从配置文件中移除。

      ignore_last_failover:在默认情况下,MHA发生切换后将会在/masterha/app1下产生app1.failover.complete文件,下次再次切换的时候如果发现该目录下存在该文件且两次切换的时间间隔不足8小时的话,将不允许触发切换。除非在第一次切换后手动rm -rf /masterha/app1/app1.failover.complete。该参数代表忽略上次MHA触发切换产生的文件。

     查看MHA Manager监控是否正常

# masterha_check_status --conf=/etc/masterha/app1.cnf 
app1 (pid:1873) is running(0:PING_OK), master:192.168.244.10

 

十、 关闭MHA Manager监控

# masterha_stop --conf=/etc/masterha/app1.cnf 
Stopped app1 successfully.
[1]+  Exit 1                  nohup masterha_manager --conf=/etc/masterha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /masterha/app1/manager.log 2>&1

至此,MHA部分配置完毕,下面,来配置VIP。

 

十一、VIP配置

VIP配置可以采用两种方式,一是通过引入Keepalived来管理VIP,另一种是在脚本中手动管理。

对于keepalived管理VIP,存在脑裂情况,即当主从网络出现问题时,slave会抢占VIP,这样会导致主从数据库都持有VIP,造成IP冲突,所以在网络不是很好的情况下,不建议采用keepalived服务。

在实际生产中使用较多的也是第二种,即在脚本中手动管理VIP,所以,对keepalived不感兴趣的童鞋可直接跳过第一种方式。

1. keepalived管理VIP

1> 安装keepalived

    因为我这里设置了Candicate master,故只在Master和Candicate master上安装。

    如果没有Candicate master,两个Slave的地位平等,则两个Slave上都需安装keepalived。

    # wget http://www.keepalived.org/software/keepalived-1.2.24.tar.gz

    # tar xvf keepalived-1.2.24.tar.gz

    # cd keepalived-1.2.24

    # ./configure --prefix=/usr/local/keepalived

    # make

    # make install

    # cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/

    # cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/

    # mkdir /etc/keepalived

    # cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

    # cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

2> 为keepalived设置单独的日志文件(非必需)

     keepalived的日志默认是输出到/var/log/message中

     # vim /etc/sysconfig/keepalived

KEEPALIVED_OPTIONS="-D -d -S 0"

     设置syslog

     # vim /etc/rsyslog.conf

     添加如下内容:

local0.*           /var/log/keepalived.log

    # service rsyslog restart 

2> 配置keepalived

     在Master上修改

     # vim /etc/keepalived/keepalived.conf

global_defs {
   notification_email {
     [email protected] 
   }
   notification_email_from [email protected] 
   smtp_server 127.0.0.1 
   smtp_connect_timeout 30
   router_id MySQL-HA
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 150
    advert_int 1
    nopreempt
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.244.188/24
    }
}

    关于keepalived的参数的详细介绍,可参考:

     LVS+Keepalived搭建MyCAT高可用负载均衡集群

     keepalived工作原理和配置说明

    将配置文件scp到Candicate master上

    # scp /etc/keepalived/keepalived.conf 192.168.244.20:/etc/keepalived/

     只需将配置文件中的priority设置为90

    注意:我们为什么在这里设置keepalived为backup模式呢?

    在master-backup模式下,如果主库宕掉,VIP会自动漂移到Slave上,当主库修复,keepalived启动后,还会将VIP抢过来,即使设置了nopreempt(不抢占)的方

    式,该动作仍会发生。但在backup-backup模式下,当主库修改,并启动keepalived后,并不会抢占新主的VIP,即便原主的priority高于新主的。

3> 启动keepalived

     先在Master上启动

     # service keepalived start

env: /etc/init.d/keepalived: Permission denied

     # chmod +x /etc/init.d/keepalived

     # service keepalived start

     查看绑定情况

     # ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:c6:47:04 brd ff:ff:ff:ff:ff:ff
    inet 192.168.244.10/24 brd 192.168.244.255 scope global eth0
    inet 192.168.244.188/24 scope global secondary eth0
    inet6 fe80::20c:29ff:fec6:4704/64 scope link 
       valid_lft forever preferred_lft forever

     可见,VIP(192168.244.188)已经绑定到Master的eth0网卡上了。

     启动Candicate master的keepalived

     # service keepalived start

4> MHA中引入keepalived

     编辑/usr/local/bin/master_ip_failover

     相对于原文件,修改地方为93-95行

  1 #!/usr/bin/env perl
  2 
  3 #  Copyright (C) 2011 DeNA Co.,Ltd.
  4 #
  5 #  This program is free software; you can redistribute it and/or modify
  6 #  it under the terms of the GNU General Public License as published by
  7 #  the Free Software Foundation; either version 2 of the License, or
  8 #  (at your option) any later version.
  9 #
 10 #  This program is distributed in the hope that it will be useful,
 11 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
 12 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 13 #  GNU General Public License for more details.
 14 #
 15 #  You should have received a copy of the GNU General Public License
 16 #   along with this program; if not, write to the Free Software
 17 #  Foundation, Inc.,
 18 #  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 19 
 20 ## Note: This is a sample script and is not complete. Modify the script based on your environment.
 21 
 22 use strict;
 23 use warnings FATAL => 'all';
 24 
 25 use Getopt::Long;
 26 use MHA::DBHelper;
 27 my (
 28   $command,        $ssh_user,         $orig_master_host,
 29   $orig_master_ip, $orig_master_port, $new_master_host,
 30   $new_master_ip,  $new_master_port,  $new_master_user,
 31   $new_master_password
 32 );
 33 
 34 GetOptions(
 35   'command=s'             => \$command,
 36   'ssh_user=s'            => \$ssh_user,
 37   'orig_master_host=s'    => \$orig_master_host,
 38   'orig_master_ip=s'      => \$orig_master_ip,
 39   'orig_master_port=i'    => \$orig_master_port,
 40   'new_master_host=s'     => \$new_master_host,
 41   'new_master_ip=s'       => \$new_master_ip,
 42   'new_master_port=i'     => \$new_master_port,
 43   'new_master_user=s'     => \$new_master_user,
 44   'new_master_password=s' => \$new_master_password,
 45 );
 46 
 47 exit &main();
 48 
 49 sub main {
 50   if ( $command eq "stop" || $command eq "stopssh" ) {
 51 
 52     # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
 53     # If you manage master ip address at global catalog database,
 54     # invalidate orig_master_ip here.
 55     my $exit_code = 1;
 56     eval {
 57 
 58       # updating global catalog, etc
 59       $exit_code = 0;
 60     };
 61     if ($@) {
 62       warn "Got Error: $@\n";
 63       exit $exit_code;
 64     }
 65     exit $exit_code;
 66   }
 67   elsif ( $command eq "start" ) {
 68 
 69     # all arguments are passed.
 70     # If you manage master ip address at global catalog database,
 71     # activate new_master_ip here.
 72     # You can also grant write access (create user, set read_only=0, etc) here.
 73     my $exit_code = 10;
 74     eval {
 75       my $new_master_handler = new MHA::DBHelper();
 76 
 77       # args: hostname, port, user, password, raise_error_or_not
 78       $new_master_handler->connect( $new_master_ip, $new_master_port,
 79         $new_master_user, $new_master_password, 1 );
 80 
 81       ## Set read_only=0 on the new master
 82       $new_master_handler->disable_log_bin_local();
 83       print "Set read_only=0 on the new master.\n";
 84       $new_master_handler->disable_read_only();
 85 
 86       ## Creating an app user on the new master
 87       #print "Creating app user on the new master..\n";
 88       #FIXME_xxx_create_user( $new_master_handler->{dbh} );
 89       $new_master_handler->enable_log_bin_local();
 90       $new_master_handler->disconnect();
 91 
 92       ## Update master ip on the catalog database, etc
 93       my $cmd;
 94       $cmd = 'ssh '.$ssh_user.'@'.$orig_master_ip.' service keepalived stop';
 95       system($cmd);
 96       $exit_code = 0;
 97     };
 98     if ($@) {
 99       warn $@;
100 
101       # If you want to continue failover, exit 10.
102       exit $exit_code;
103     }
104     exit $exit_code;
105   }
106   elsif ( $command eq "status" ) {
107 
108     # do nothing
109     exit 0;
110   }
111   else {
112     &usage();
113     exit 1;
114   }
115 }
116 
117 sub usage {
118   print
119 "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
120 }

 

2. 通过脚本的方式管理VIP

   编辑/usr/local/bin/master_ip_failover

#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
my (
  $command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
  $new_master_ip,  $new_master_port,  $new_master_user,
  $new_master_password
);

my $vip = '192.168.244.188';
my $key = "2";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip/24";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $ssh_send_garp = "/sbin/arping -U $vip -I eth0 -c 1";


GetOptions(
  'command=s'             => \$command,
  'ssh_user=s'            => \$ssh_user,
  'orig_master_host=s'    => \$orig_master_host,
  'orig_master_ip=s'      => \$orig_master_ip,
  'orig_master_port=i'    => \$orig_master_port,
  'new_master_host=s'     => \$new_master_host,
  'new_master_ip=s'       => \$new_master_ip,
  'new_master_port=i'     => \$new_master_port,
  'new_master_user=s'     => \$new_master_user,
  'new_master_password=s' => \$new_master_password,
);

exit &main();

sub main {
  if ( $command eq "stop" || $command eq "stopssh" ) {

    # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
    # If you manage master ip address at global catalog database,
    # invalidate orig_master_ip here.
    my $exit_code = 1;
    eval {
      print "Disabling the VIP an old master: $orig_master_host \n";
      &stop_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {

    # all arguments are passed.
    # If you manage master ip address at global catalog database,
    # activate new_master_ip here.
    # You can also grant write access (create user, set read_only=0, etc) here.
    my $exit_code = 10;
    eval {
      
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print "Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      # print "Creating app user on the new master..\n";
      # FIXME_xxx_create_user( $new_master_handler->{dbh} );
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      print "Enabling the VIP $vip on the new master: $new_master_host \n";
      &start_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn $@;

      # If you want to continue failover, exit 10.
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub start_vip(){
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
    `ssh $ssh_user\@$new_master_host \" $ssh_send_garp \"`;
}

sub stop_vip(){   
return 0  unless  ($ssh_user); `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`; } sub usage { print "Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n"; }

 

实际生产环境中,推荐这种方式来管理VIP,可有效防止脑裂情况的发生。

 

至此,MHA高可用环境基本搭建完毕。

 

关于MHA的常见操作,包括自动Failover,手动Failover,在线切换,可参考另一篇博客:

MHA在线切换的步骤和原理

MHA自动Failover与手动Failover的实践及原理

 

总结:

1. 可单独调试master_ip_failover,master_ip_online_change,send_report等脚本

 /usr/local/bin/master_ip_online_change --command=stop --orig_master_ip=192.168.244.10 --orig_master_host=192.168.244.10 --orig_master_port=3306 --orig_master_user=monitor --orig_master_password=monitor123 --orig_master_ssh_user=root --new_master_host=192.168.244.20 --new_master_ip=192.168.244.20 --new_master_port=3306 --new_master_user=monitor --new_master_password=monitor123 --new_master_ssh_user=root

 

/usr/local/bin/master_ip_failover --command=start --ssh_user=root --orig_master_host=192.168.244.10 --orig_master_ip=192.168.244.10 --orig_master_port=3306 --new_master_host=192.168.244.20 --new_master_ip=192.168.244.20 --new_master_port=3306 --new_master_user='monitor' --new_master_password='monitor123'

 

 2. 官方对于master_ip_failover,master_ip_online_change,send_report脚本,给出的只是sample,切换的逻辑需要自己定义。

     很多童鞋对perl并不熟悉,觉得无从下手,其实,完全可以调用其它脚本,譬如python,shell等。

     如:

[root@node4 ~]# cat test.pl
#!/usr/bin/perl
use strict;
my $cmd='python /root/test.py';
system($cmd);

[root@node4 ~]# cat test.py
#!/usr/bin/python
print "hello,python"

[root@node4 ~]# perl test.pl
hello,python

 

参考:

《深入浅出MySQL》 

 

附:

master_ip_online_change

#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
use MHA::NodeUtil;
use Time::HiRes qw( sleep gettimeofday tv_interval );
use Data::Dumper;

my $_tstart;
my $_running_interval = 0.1;

my $vip = '192.168.244.188';
my $key = "2";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip/24";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $ssh_send_garp = "/sbin/arping -U $vip -I eth0 -c 1";

my (
  $command,              $orig_master_is_new_slave, $orig_master_host,
  $orig_master_ip,       $orig_master_port,         $orig_master_user,
  $orig_master_password, $orig_master_ssh_user,     $new_master_host,
  $new_master_ip,        $new_master_port,          $new_master_user,
  $new_master_password,  $new_master_ssh_user,
);
GetOptions(
  'command=s'                => \$command,
  'orig_master_is_new_slave' => \$orig_master_is_new_slave,
  'orig_master_host=s'       => \$orig_master_host,
  'orig_master_ip=s'         => \$orig_master_ip,
  'orig_master_port=i'       => \$orig_master_port,
  'orig_master_user=s'       => \$orig_master_user,
  'orig_master_password=s'   => \$orig_master_password,
  'orig_master_ssh_user=s'   => \$orig_master_ssh_user,
  'new_master_host=s'        => \$new_master_host,
  'new_master_ip=s'          => \$new_master_ip,
  'new_master_port=i'        => \$new_master_port,
  'new_master_user=s'        => \$new_master_user,
  'new_master_password=s'    => \$new_master_password,
  'new_master_ssh_user=s'    => \$new_master_ssh_user,
);

exit &main();

sub start_vip(){
    `ssh $new_master_ssh_user\@$new_master_host \" $ssh_start_vip \"`;
    `ssh $new_master_ssh_user\@$new_master_host \" $ssh_send_garp \"`;
}

sub stop_vip(){
    `ssh $orig_master_ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}


sub current_time_us {
  my ( $sec, $microsec ) = gettimeofday();
  my $curdate = localtime($sec);
  return $curdate . " " . sprintf( "%06d", $microsec );
}

sub sleep_until {
  my $elapsed = tv_interval($_tstart);
  if ( $_running_interval > $elapsed ) {
    sleep( $_running_interval - $elapsed );
  }
}

sub get_threads_util {
  my $dbh                    = shift;
  my $my_connection_id       = shift;
  my $running_time_threshold = shift;
  my $type                   = shift;
  $running_time_threshold = 0 unless ($running_time_threshold);
  $type                   = 0 unless ($type);
  my @threads;

  my $sth = $dbh->prepare("SHOW PROCESSLIST");
  $sth->execute();

  while ( my $ref = $sth->fetchrow_hashref() ) {
    my $id         = $ref->{Id};
    my $user       = $ref->{User};
    my $host       = $ref->{Host};
    my $command    = $ref->{Command};
    my $state      = $ref->{State};
    my $query_time = $ref->{Time};
    my $info       = $ref->{Info};
    $info =~ s/^\s*(.*?)\s*$/$1/ if defined($info);
    next if ( $my_connection_id == $id );
    next if ( defined($query_time) && $query_time < $running_time_threshold );
    next if ( defined($command)    && $command eq "Binlog Dump" );
    next if ( defined($user)       && $user eq "system user" );
    next
      if ( defined($command)
      && $command eq "Sleep"
      && defined($query_time)
      && $query_time >= 1 );

    if ( $type >= 1 ) {
      next if ( defined($command) && $command eq "Sleep" );
      next if ( defined($command) && $command eq "Connect" );
    }

    if ( $type >= 2 ) {
      next if ( defined($info) && $info =~ m/^select/i );
      next if ( defined($info) && $info =~ m/^show/i );
    }

    push @threads, $ref;
  }
  return @threads;
}

sub main {
  if ( $command eq "stop" ) {
    ## Gracefully killing connections on the current master
    # 1. Set read_only= 1 on the new master
    # 2. DROP USER so that no app user can establish new connections
    # 3. Set read_only= 1 on the current master
    # 4. Kill current queries
    # * Any database access failure will result in script die.
    my $exit_code = 1;
    eval {
      ## Setting read_only=1 on the new master (to avoid accident)
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error(die_on_error)_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );
      print current_time_us() . " Set read_only on the new master.. ";
      $new_master_handler->enable_read_only();
      if ( $new_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }
      $new_master_handler->disconnect();

      # Connecting to the orig master, die if any database error happens
      my $orig_master_handler = new MHA::DBHelper();
      $orig_master_handler->connect( $orig_master_ip, $orig_master_port,
        $orig_master_user, $orig_master_password, 1 );

      ## Drop application user so that nobody can connect. Disabling per-session binlog beforehand
      $orig_master_handler->disable_log_bin_local();
      # print current_time_us() . " Drpping app user on the orig master..\n";
      #drop_app_user($orig_master_handler);

      ## Waiting for N * 100 milliseconds so that current connections can exit
      my $time_until_read_only = 15;
      $_tstart = [gettimeofday];
      my @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_read_only > 0 && $#threads >= 0 ) {
        if ( $time_until_read_only % 5 == 0 ) {
          printf
"%s Waiting all running %d threads are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_read_only * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_read_only--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Setting read_only=1 on the current master so that nobody(except SUPER) can write
      print current_time_us() . " Set read_only=1 on the orig master.. ";
      $orig_master_handler->enable_read_only();
      if ( $orig_master_handler->is_read_only() ) {
        print "ok.\n";
      }
      else {
        die "Failed!\n";
      }

      ## Waiting for M * 100 milliseconds so that current update queries can complete
      my $time_until_kill_threads = 5;
      @threads = get_threads_util( $orig_master_handler->{dbh},
        $orig_master_handler->{connection_id} );
      while ( $time_until_kill_threads > 0 && $#threads >= 0 ) {
        if ( $time_until_kill_threads % 5 == 0 ) {
          printf
"%s Waiting all running %d queries are disconnected.. (max %d milliseconds)\n",
            current_time_us(), $#threads + 1, $time_until_kill_threads * 100;
          if ( $#threads < 5 ) {
            print Data::Dumper->new( [$_] )->Indent(0)->Terse(1)->Dump . "\n"
              foreach (@threads);
          }
        }
        sleep_until();
        $_tstart = [gettimeofday];
        $time_until_kill_threads--;
        @threads = get_threads_util( $orig_master_handler->{dbh},
          $orig_master_handler->{connection_id} );
      }

      ## Terminating all threads
      print current_time_us() . " Killing all application threads..\n";
      $orig_master_handler->kill_threads(@threads) if ( $#threads >= 0 );
      print current_time_us() . " done.\n";
      $orig_master_handler->enable_log_bin_local();
      $orig_master_handler->disconnect();

      ## Droping the VIP     
      print "Disabling the VIP an old master: $orig_master_host \n";
      &stop_vip();

      ## After finishing the script, MHA executes FLUSH TABLES WITH READ LOCK
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {
    ## Activating master ip on the new master
    # 1. Create app user with write privileges
    # 2. Moving backup script if needed
    # 3. Register new master's ip to the catalog database

# We don't return error even though activating updatable accounts/ip failed so that we don't interrupt slaves' recovery.
# If exit code is 0 or 10, MHA does not abort
    my $exit_code = 10;
    eval {
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print current_time_us() . " Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      #print current_time_us() . " Creating app user on the new master..\n";
      # create_app_user($new_master_handler);
      print "Enabling the VIP $vip on the new master: $new_master_host \n";
      &start_vip();
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      ## Update master ip on the catalog database, etc
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub usage {
  print
"Usage: master_ip_online_change --command=start|stop|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
  die;
}

 

master_ip_failover

#!/usr/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';

use Getopt::Long;
use MHA::DBHelper;
my (
  $command,        $ssh_user,         $orig_master_host,
  $orig_master_ip, $orig_master_port, $new_master_host,
  $new_master_ip,  $new_master_port,  $new_master_user,
  $new_master_password
);

my $vip = '192.168.244.188';
my $key = "2";
my $ssh_start_vip = "/sbin/ifconfig eth0:$key $vip/24";
my $ssh_stop_vip = "/sbin/ifconfig eth0:$key down";
my $ssh_send_garp = "/sbin/arping -U $vip -I eth0 -c 1";


GetOptions(
  'command=s'             => \$command,
  'ssh_user=s'            => \$ssh_user,
  'orig_master_host=s'    => \$orig_master_host,
  'orig_master_ip=s'      => \$orig_master_ip,
  'orig_master_port=i'    => \$orig_master_port,
  'new_master_host=s'     => \$new_master_host,
  'new_master_ip=s'       => \$new_master_ip,
  'new_master_port=i'     => \$new_master_port,
  'new_master_user=s'     => \$new_master_user,
  'new_master_password=s' => \$new_master_password,
);

exit &main();

sub main {
  if ( $command eq "stop" || $command eq "stopssh" ) {

    # $orig_master_host, $orig_master_ip, $orig_master_port are passed.
    # If you manage master ip address at global catalog database,
    # invalidate orig_master_ip here.
    my $exit_code = 1;
    eval {
      print "Disabling the VIP an old master: $orig_master_host \n";
      &stop_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn "Got Error: $@\n";
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "start" ) {

    # all arguments are passed.
    # If you manage master ip address at global catalog database,
    # activate new_master_ip here.
    # You can also grant write access (create user, set read_only=0, etc) here.
    my $exit_code = 10;
    eval {
      
      my $new_master_handler = new MHA::DBHelper();

      # args: hostname, port, user, password, raise_error_or_not
      $new_master_handler->connect( $new_master_ip, $new_master_port,
        $new_master_user, $new_master_password, 1 );

      ## Set read_only=0 on the new master
      $new_master_handler->disable_log_bin_local();
      print "Set read_only=0 on the new master.\n";
      $new_master_handler->disable_read_only();

      ## Creating an app user on the new master
      # print "Creating app user on the new master..\n";
      # FIXME_xxx_create_user( $new_master_handler->{dbh} );
      $new_master_handler->enable_log_bin_local();
      $new_master_handler->disconnect();

      print "Enabling the VIP $vip on the new master: $new_master_host \n";
      &start_vip();
      $exit_code = 0;
    };
    if ($@) {
      warn $@;

      # If you want to continue failover, exit 10.
      exit $exit_code;
    }
    exit $exit_code;
  }
  elsif ( $command eq "status" ) {

    # do nothing
    exit 0;
  }
  else {
    &usage();
    exit 1;
  }
}

sub start_vip(){
    `ssh $ssh_user\@$new_master_host \" $ssh_start_vip \"`;
    `ssh $ssh_user\@$new_master_host \" $ssh_send_garp \"`;
}

sub stop_vip(){
    return 0  unless  ($ssh_user);
    `ssh $ssh_user\@$orig_master_host \" $ssh_stop_vip \"`;
}

sub usage {
  print
"Usage: master_ip_failover --command=start|stop|stopssh|status --orig_master_host=host --orig_master_ip=ip --orig_master_port=port --new_master_host=host --new_master_ip=ip --new_master_port=port\n";
}

 

masterha_secondary_check

#!/bin/env perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

use strict;
use warnings FATAL => 'all';

use English qw(-no_match_vars);
use Getopt::Long;
use Pod::Usage;
use MHA::ManagerConst;

my @monitoring_servers;
my (
  $help,        $version,         $ssh_user,  $ssh_port,
  $ssh_options, $master_host,     $master_ip, $master_port,
  $master_user, $master_password, $ping_type
);
my $timeout = 5;

$| = 1;
GetOptions(
  'help'              => \$help,
  'version'           => \$version,
  'secondary_host=s'  => \@monitoring_servers,
  'user=s'            => \$ssh_user,
  'port=s'            => \$ssh_port,
  'options=s'         => \$ssh_options,
  'master_host=s'     => \$master_host,
  'master_ip=s'       => \$master_ip,
  'master_port=i'     => \$master_port,
  'master_user=s'     => \$master_user,
  'master_password=s' => \$master_password,
  'ping_type=s'       => \$ping_type,
  'timeout=i'         => \$timeout,
);

if ($version) {
  print "masterha_secondary_check version $MHA::ManagerConst::VERSION.\n";
  exit 0;
}

if ($help) {
  pod2usage(0);
}

unless ($master_host) {
  pod2usage(1);
}

sub exit_by_signal {
  exit 1;
}
local $SIG{INT} = $SIG{HUP} = $SIG{QUIT} = $SIG{TERM} = \&exit_by_signal;

$ssh_user    = "root" unless ($ssh_user);
$ssh_port    = 22     unless ($ssh_port);
$master_port = 3306   unless ($master_port);

if ($ssh_options) {
  $MHA::ManagerConst::SSH_OPT_CHECK = $ssh_options;
}
$MHA::ManagerConst::SSH_OPT_CHECK =~ s/VAR_CONNECT_TIMEOUT/$timeout/;

# 0: master is not reachable from all monotoring servers
# 1: unknown errors
# 2: at least one of monitoring servers is not reachable from this script
# 3: master is reachable from at least one of monitoring servers
my $exit_code = 0;

foreach my $monitoring_server (@monitoring_servers) {
  my $ssh_user_host = $ssh_user . '@' . $monitoring_server;
  my $command =
"ssh $MHA::ManagerConst::SSH_OPT_CHECK -p $ssh_port $ssh_user_host \"perl -e "
    . "\\\"use IO::Socket::INET; my \\\\\\\$sock = IO::Socket::INET->new"
    . "(PeerAddr => \\\\\\\"$master_host\\\\\\\", PeerPort=> $master_port, "
    . "Proto =>'tcp', Timeout => $timeout); if(\\\\\\\$sock) { close(\\\\\\\$sock); "
    . "exit 3; } exit 0;\\\" \"";
  my $ret = system($command);
  $ret = $ret >> 8;
  if ( $ret == 0 ) {
    print
"Monitoring server $monitoring_server is reachable, Master is not reachable from $monitoring_server. OK.\n";
    next;
  }
  if ( $ret == 3 ) {
    if ( defined $ping_type
      && $ping_type eq $MHA::ManagerConst::PING_TYPE_INSERT )
    {
      my $ret_insert;
      my $command_insert =
          "ssh $MHA::ManagerConst::SSH_OPT_CHECK -p $ssh_port $ssh_user_host \'"
        . "/usr/bin/mysql -u$master_user -p$master_password -h$master_host "
        . "-e \"CREATE DATABASE IF NOT EXISTS infra; "
        . "CREATE TABLE IF NOT EXISTS infra.chk_masterha (\\`key\\` tinyint NOT NULL primary key,\\`val\\` int(10) unsigned NOT NULL DEFAULT '0'\) engine=MyISAM; "
        . "INSERT INTO infra.chk_masterha values (1,unix_timestamp()) ON DUPLICATE KEY UPDATE val=unix_timestamp()\"\'";
      my $sigalrm_timeout = 3;
      eval {
        local $SIG{ALRM} = sub {
          die "timeout.\n";
        };
        alarm $sigalrm_timeout;
        $ret_insert = system($command_insert);
        $ret_insert = $ret_insert >> 8;
        alarm 0;
      };
      if ( $@ || $ret_insert != 0 ) {
        print
"Monitoring server $monitoring_server is reachable, Master is not writable from $monitoring_server. OK.\n";
        next;
      }
    }
    print "Master is reachable from $monitoring_server!\n";
    $exit_code = 3;
    last;
  }
  else {
    print "Monitoring server $monitoring_server is NOT reachable!\n";
    $exit_code = 2;
    last;
  }
}

exit $exit_code;

# ############################################################################
# Documentation
# ############################################################################

=pod

=head1 NAME

masterha_secondary_check - Checking master availability from additional network routes

=head1 SYNOPSIS

masterha_secondary_check -s secondary_host1 -s secondary_host2 .. --user=ssh_username --master_host=host --master_ip=ip --master_port=port

See online reference (http://code.google.com/p/mysql-master-ha/wiki/Parameters#secondary_check_script) for details.

=head1 DESCRIPTION

See online reference (http://code.google.com/p/mysql-master-ha/wiki/Parameters#secondary_check_script) for details.

 

send_report

#!/usr/bin/perl

#  Copyright (C) 2011 DeNA Co.,Ltd.
#
#  This program is free software; you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation; either version 2 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#  Foundation, Inc.,
#  51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

## Note: This is a sample script and is not complete. Modify the script based on your environment.

use strict;
use warnings FATAL => 'all';
use Mail::Sender;
use Getopt::Long;

#new_master_host and new_slave_hosts are set only when recovering master succeeded
my ( $dead_master_host, $new_master_host, $new_slave_hosts, $subject, $body );
my $smtp='smtp.126.com';
my $mail_from='[email protected]';
my $mail_user='[email protected]';
my $mail_pass='xxxxx';
my $mail_to=['[email protected]'];
GetOptions(
  'orig_master_host=s' => \$dead_master_host,
  'new_master_host=s'  => \$new_master_host,
  'new_slave_hosts=s'  => \$new_slave_hosts,
  'subject=s'          => \$subject,
  'body=s'             => \$body,
);
mailToContacts($smtp,$mail_from,$mail_user,$mail_pass,$mail_to,$subject,$body);

sub mailToContacts {
    my ( $smtp, $mail_from, $user, $passwd, $mail_to, $subject, $msg ) = @_;
    open my $DEBUG, "> /tmp/monitormail.log"
        or die "Can't open the debug      file:$!\n";
    my $sender = new Mail::Sender {
        ctype       => 'text/plain; charset=utf-8',
        encoding    => 'utf-8',
        smtp        => $smtp,
        from        => $mail_from,
        auth        => 'LOGIN',
        TLS_allowed => '0',
        authid      => $user,
        authpwd     => $passwd,
        to          => $mail_to,
        subject     => $subject,
        debug       => $DEBUG
    };

    $sender->MailMsg(
        {   msg   => $msg,
            debug => $DEBUG
        }
    ) or print $Mail::Sender::Error;
    return 1;
}



# Do whatever you want here
exit 0;

 

相关 [mysql mha 原理] 推荐:

MySQL高可用方案MHA的部署和原理 - iVictor - 博客园

- -
MHA(Master High Availability)是一套相对成熟的MySQL高可用方案,能做到在0~30s内自动完成数据库的故障切换操作,在master服务器不宕机的情况下,基本能保证数据的一致性. 它由两部分组成:MHA Manager(管理节点)和MHA Node(数据节点). 其中,MHA Manager可以单独部署在一台独立的机器上管理多个master-slave集群,也可以部署在一台slave上.

mysql 高可用方案MHA介绍

- - CSDN博客数据库推荐文章
MySQL 大牛用Perl写的一套MySQL故障切换方案,来保证数据库系统的高可用.在宕机的时间内(通常10—30秒内),完成故障切换,部署MHA,可避免主从一致性问题,节约购买新服务器的费用,不影响服务器性能,易安装,不改变现有部署.    还支持在线切换,从当前运行master切换到一个新的master上面,只需要很短的时间(0.5-2秒内),此时仅仅阻塞写操作,并不影响读操作,便于主机硬件维护.

MySQL高可用性大杀器之MHA

- - OurMySQL
作为前提条件,应先配置MySQL复制,并设置 SSH公钥免密码登录. 下面以CentOS为例来说明,最好先安装 EPEL,不然YUM可能找不到某些软件包. MHA由Node和Manager组成,Node运行在每一台MySQL服务器上,也就是说,不管是MySQL主服务器,还是MySQL从服务器,都要安装Node,而Manager通常运行在独立的服务器上,但如果硬件资源吃紧,也可以用一台MySQL从服务器来兼职Manager的角色.

MySQL 5.5 keepalived + haproxy + MHA 自动容灾

- - CSDN博客数据库推荐文章
keepalived安装:. } } 在83上配置 vim /usr/local/etc/keepalived/keepalived.conf global_defs {. 在81和83上安装mha node,在82上安装mha manager. vi /usr/local/share/perl5/MHA/ManagerConst.pm 89 my $msg = $args{message}; 90 $msg = "" unless($msg); <=插入一行 91 chomp $msg;.

mysql高可用架构MHA搭建(centos7+mysql5.7.28) - 七星6609 - 博客园

- -
无论是传统行业,还是互联网行业,数据可用性都是至关重要的,虽然现在已经步入大数据时代,nosql比较流行,但是作为数据持久化及事务性的关系型数据库依然是项目首选,比如mysql. 现在几乎所有的公司项目,不说可用性必须达到5个9,至少也要要求,数据库出现问题,不能丢失数据,能够快速响应异常处理,下面使用mha来搭建mysql高可用集群(基于centos7+mysql5.7):.

mysql索引原理之B+/-Tree

- - CSDN博客架构设计推荐文章
索引,是为了更快的查询数据,查询算法有很多,对应的数据结构也不少,数据库常用的索引数据结构一般为B+Tree. 关于B-Tree的官方定义个人觉得比较难懂,通俗一点就是举个例子. 假如:一本英文字典,单词+详细解释组成了一条记录,现在需要索引单词,那么以单词为key,单词+详细解释为data,B-Tree就是以一个二元组{key,data}来定义一条记录.

MHA+ProxySQL实现读写分离高可用 - yayun - 博客园

- -
最近在研究ProxySQL,觉得还挺不错的,所以就简单的折腾了一下,ProxySQL目前也是Percona在推荐的一个读写分离的中间件. 关于详细的介绍可以参考官方文档. 本文主要介绍的是MHA+ProxySQL读写分离以及高可用,ProxySQL的细节请参考文档,目前已经有人写的非常详细了,文章最后会给出链接.

MySQL索引背后的数据结构及算法原理

- Mike - 博客园-EricZhang&#39;s Technology Blog
在编程领域有一句人尽皆知的法则“程序 = 数据结构 + 算法”,我个人是不太赞同这句话(因为我觉得程序不仅仅是数据结构加算法),但是在日常的学习和工作中我确认深深感受到数据结构和算法的重要性,很多东西,如果你愿意稍稍往深处挖一点,那么扑面而来的一定是各种数据结构和算法知识. 例如几乎每个程序员都要打交道的数据库,如果仅仅是用来存个数据、建建表、建建索引、做做增删改查,那么也许觉得数据结构和这东西没什么关系.