JUnit best practices
JUnit is a typical toolkit: if used with care and with recognition of its idiosyncrasies, JUnit will help to develop good, robust tests. Used blindly, it may produce a pile of spaghetti instead of a test suite. This article presents some guidelines that can help you avoid the pasta nightmare. The guidelines sometimes contradict themselves and each other -- this is deliberate. In my experience, there are rarely hard and fast rules in development, and guidelines that claim to be are misleading.
We'll also closely examine two useful additions to the developer's toolkit:
When faced with unit testing, many teams end up producing some kind of testing framework. JUnit, available as open source, eliminates this onerous task by providing a ready-made framework for unit testing. JUnit, best used as an integral part of a development testing regime, provides a mechanism that developers can use to consistently write and execute tests. So, what are the JUnit best practices? Do not use the test-case constructor to set up a test case Imagine that while performing the setup, the setup code throws an This stack trace proves rather uninformative; it only indicates that the test case could not be instantiated. It doesn't detail the original error's location or place of origin. This lack of information makes it hard to deduce the exception's underlying cause. Instead of setting up the data in the constructor, perform test setup by overriding This stack trace is much more informative; it shows which exception was thrown ( Don't assume the order in which tests within a test case run In this example, it is not certain that JUnit will run these tests in any specific order when using reflection. Running the tests on different platforms and Java VMs may therefore yield different results, unless your tests are designed to run in any order. Avoiding temporal coupling will make the test case more robust, since changes in the order will not affect other tests. If the tests are coupled, the errors that result from a minor update may prove difficult to find. In situations where ordering tests makes sense -- when it is more efficient for tests to operate on some shared data that establish a fresh state as each test runs -- use a static There is no guarantee in the JUnit API documentation as to the order your tests will be called in, because JUnit employs a Avoid writing test cases with side effects In the first situation, the individual test case may operate correctly. However, if incorporated into a In the second situation, a test case may have updated some system state so that it cannot run again without manual intervention, which may consist of deleting test data from the database (for example). Think carefully before introducing manual intervention. First, the manual intervention will need to be documented. Second, the tests could no longer be run in an unattended mode, removing your ability to run tests overnight or as part of some automated periodic test run. Call a superclass's setUp() and tearDown() methods when subclassing Can you spot the deliberate mistake? Do not load data from hard-coded locations on a filesystem The code above relies on the data set being in the One solution might be: However, that solution depends on the test running from the same directory as the test data. If several different test cases assume this, it is difficult to integrate them into one test suite without continually changing the current directory. To solve the problem, access the dataset using either Test data should, if possible, be stored with the source code in a configuration management (CM) system. However, if you're using the aforementioned resource mechanism, you'll need to write a script that moves all the test data from the CM system into the classpath of the system under test. A less ungainly approach is to store the test data in the source tree along with the source files. With this approach, you need a location-independent mechanism to locate the test data within the source tree. One such mechanism is a class. If a class can be mapped to a specific source directory, you could write code like this: Now you must only determine how to map from a class to the directory that contains the relevant source file. You can identify the root of the source tree (assuming it has a single root) by a system property. The class's package name can then identify the directory where the source file lies. The resource loads from that directory. For Unix and NT, the mapping is straightforward: replace every instance of '.' with Keep tests in the same location as the source code Name tests properly Proper naming helps code readers understand each test's purpose. Ensure that tests are time-independent Consider locale when writing tests Unfortunately, that code doesn't work on a machine with a different locale. Therefore, it would be far better to write: The second approach is far more resilient to locale changes. Utilize JUnit's assert/fail methods and exception handling for clean test code JUnit automatically catches exceptions. It considers uncaught exceptions to be errors, which means the above example has redundant code in it. Here's a far simpler way to achieve the same result: In this example, the redundant code has been removed, making the test easier to read and maintain (since there is less code). Use the wide variety of assert methods to express your intention in a simpler fashion. Instead of writing: Write: The above example is much more useful to a code reader. And if the assertion fails, it provides the tester with more information. JUnit also supports floating point comparisons: When you compare floating point numbers, this useful function saves you from repeatedly writing code to compute the difference between the result and the expected value. Use Document tests in javadoc Avoid visual inspection Swing A more thorough treatment of this can be found in the worked example of testing a GUI, referenced in the Resources section. XML Servlets For example: A simpler solution is to use You can avoid visual inspection in many ways. However, sometimes it is more cost-effective to use visual inspection or a more specialized testing tool. For example, testing a UI's dynamic behavior within JUnit is complicated, but possible. It may be a better idea to purchase one of the many UI record/playback testing tools available, or to perform some visual inspection as part of testing. However, that doesn't mean the general rule -- don't visually inspect -- should be ignored. Keep tests small and fast Use the reflection-driven JUnit API Build a test case for the entire system If we built a test case for the entire system, it would consist of all the other test cases, already defined. The test case would define the We can use the Java type system to determine what sort of test a test case represents. We can have test cases extend classes like Let's look at each class in turn. ClassFinder In the code above, we iterate over all the files in a directory. If a filename has a ".class" extension, we determine the fully qualified class name of the class stored in the classfile, as seen here: This code uses the JCF package to load the classfile and determine the name of the class stored within it. The JCF package is a set of utility classes for loading and examining classfiles. (See Resources for more information.) The JCF package allows us to find each class's full class name. We could infer the class name from the directory name, but that doesn't work well for build systems that don't store classes according to this structure. Nor does it work for inner classes. Lastly, we check to see if the file is actually a directory. (See the code snippet below.) If it is, we recurse into it. This allows us to discover all the classes in a directory tree: TestCaseLoader You'll find the meat of the class in the Here's the code: Next, the TestAll The With To test an entire system using these classes, execute the following command (in a Windows command shell): This command loads and runs all test cases of type Test thread safety To use A multithreaded test case needs to spawn a number of threads that perform some operation. We need to start those threads, wait until they've executed, and then return the results to JUnit -- all done in the code below. The code is trivial; in practice, this code would spawn multiple threads that performed different operations on the class under test. After each operation the class invariants and post-conditions would be tested to ensure that the class was behaving properly. Now that I've shown how to use Exceptions caught in the test threads must be propagated into the Finally, we define the class that each test thread extends. The purpose of this class is to provide an environment ( The implementation above helps to develop multithreaded test cases. It handles exceptions thrown in the multiple testing threads and passes them back to JUnit. JUnit only sees a test case that behaves like a single-threaded test. The unit test developer can extend that test case to develop multithreaded tests, without spending much time developing thread-handling code. Conclusion JUnit is an excellent framework for unit-testing Java applications. One final thought: If you just started using JUnit to produce unit tests, stick at it. For the first few weeks, you may not see any real reward for your labors. In fact, you may feel that the whole process slows you down. However, after a few weeks, you'll begin to enhance existing code. Then you'll run your tests, pick up new bugs, and fix them. You'll be far more confident in your code base and you will see the value of unit testing. About the author
TestCase that better supports tests in multiple threads
Setting up a test case in the constructor is not a good idea. Consider:
public class SomeTest extends TestCase
public SomeTest (String testName) {
super (testName);
// Perform test set-up
}
}
IllegalStateException. In response, JUnit would throw an AssertionFailedError, indicating that the test case could not be instantiated. Here is an example of the resulting stack trace:
junit.framework.AssertionFailedError: Cannot instantiate test case: test1 at
junit.framework.Assert.fail(Assert.java:143) at
junit.framework.TestSuite$1.runTest(TestSuite.java:178) at
junit.framework.TestCase.runBare(TestCase.java:129) at
junit.framework.TestResult$1.protect(TestResult.java:100) at
junit.framework.TestResult.runProtected(TestResult.java:117) at
junit.framework.TestResult.run(TestResult.java:103) at
junit.framework.TestCase.run(TestCase.java:120) at
junit.framework.TestSuite.run(TestSuite.java, Compiled Code) at
junit.ui.TestRunner$12.run(TestRunner.java:429)
setUp(). Any exception thrown within setUp() is reported correctly. Compare this stack trace with the previous example:
java.lang.IllegalStateException: Oops at bp.DTC.setUp(DTC.java:34) at
junit.framework.TestCase.runBare(TestCase.java:127) at
junit.framework.TestResult$1.protect(TestResult.java:100) at
junit.framework.TestResult.runProtected(TestResult.java:117) at
junit.framework.TestResult.run(TestResult.java:103)
...
IllegalStateException) and from where. That makes it far easier to explain the test setup's failure.
You should not assume that tests will be called in any particular order. Consider the following code segment:
public class SomeTestCase extends TestCase {
public SomeTestCase (String testName) {
super (testName);
}
public void testDoThisFirst () {
...
}
public void testDoThisSecond () {
}
}
suite() method like this one to ensure the ordering:
public static Test suite() {
suite.addTest(new SomeTestCase ("testDoThisFirst";));
suite.addTest(new SomeTestCase ("testDoThisSecond";));
return suite;
}
Vector to store tests. However, you can expect the above tests to be executed in the order they were added to the test suite.
Test cases that have side effects exhibit two problems:
TestSuite that runs every test case on the system, it may cause other test cases to fail. That failure mode can be difficult to diagnose, and the error may be located far from the test failure.
When you consider:
public class SomeTestCase extends AnotherTestCase {
// A connection to a database
private Database theDatabase;
public SomeTestCase (String testName) {
super (testName);
}
public void testFeatureX () {
...
}
public void setUp () {
// Clear out the database
theDatabase.clear ();
}
}
setUp() should call super.setUp() to ensure that the environment defined in AnotherTestCase initializes. Of course, there are exceptions: if you design the base class to work with arbitrary test data, there won't be a problem.
Tests often need to load data from some location in the filesystem. Consider the following:
public void setUp () {
FileInputStream inp ("C:\\TestData\\dataSet1.dat");
...
}
C:\TestData path. That assumption is incorrect in two situations:
C: and stores it on another disk
public void setUp () {
FileInputStream inp ("dataSet1.dat");
...
}
Class.getResource() or Class.getResourceAsStream(). Using them, however, means that resources load from a location relative to the class's origin.
InputStream inp = SourceResourceLoader.getResourceAsStream (this.getClass (), "dataSet1.dat");
File.separatorChar.
If the test source is kept in the same location as the tested classes, both test and class will compile during a build. This forces you to keep the tests and classes synchronized during development. Indeed, unit tests not considered part of the normal build quickly become dated and useless.
Name the test case TestClassUnderTest. For example, the test case for the class MessageLog should be TestMessageLog. That makes it simple to work out what class a test case tests. Test methods' names within the test case should describe what they test:
testLoggingEmptyMessage()
testLoggingNullMessage()
testLoggingWarningMessage()
testLoggingErrorMessage()
Where possible, avoid using data that may expire; such data should be either manually or programmatically refreshed. It is often simpler to instrument the class under test, with a mechanism for changing its notion of today. The test can then operate in a time-independent manner without having to refresh the data.
Consider a test that uses dates. One approach to creating dates would be:
Date date = DateFormat.getInstance ().parse ("dd/mm/yyyy");
Calendar cal = Calendar.getInstance ();
Cal.set (yyyy, mm-1, dd);
Date date = Calendar.getTime ();
Many JUnit novices make the mistake of generating elaborate try and catch blocks to catch unexpected exceptions and flag a test failure. Here is a trivial example of this:
public void exampleTest () {
try {
// do some test
} catch (SomeApplicationException e) {
fail ("Caught SomeApplicationException exception");
}
}
public void exampleTest () throws SomeApplicationException {
// do some test
}
assert (creds == 3);
assertEquals ("The number of credentials should be 3", 3, creds);
assertEquals ("some message", result, expected, delta);
assertSame() to test for two references that point to the same object. Use assertEquals() to test for two objects that are equal.
Test plans documented in a word processor tend to be error-prone and tedious to create. Also, word-processor-based documentation must be kept synchronized with the unit tests, adding another layer of complexity to the process. If possible, a better solution would be to include the test plans in the tests' javadoc, ensuring that all test plan data reside in one place.
Testing servlets, user interfaces, and other systems that produce complex output is often left to visual inspection. Visual inspection -- a human inspecting output data for errors -- requires patience, the ability to process large quantities of information, and great attention to detail: attributes not often found in the average human being. Below are some basic techniques that will help reduce the visual inspection component of your test cycle.
When testing a Swing-based UI, you can write tests to ensure that:
When testing classes that process XML, it pays to write a routine that compares two XML DOMs for equality. You can then programmatically define the correct DOM in advance and compare it with the actual output from your processing methods.
With servlets, a couple of approaches can work. You can write a dummy servlet framework and preconfigure it during a test. The framework must contain derivations of classes found in the normal servlet environment. These derivations should allow you to preconfigure their responses to method calls from the servlet.
HttpServletRequest can be subclassed to allow the test class to specify the header, method, path info, and other data
HttpServletResponse can be subclassed to return an output stream that stores the servlets' responses in a string for later checking
HttpUnit to test your servlets. HttpUnit provides a DOM view of a request's results, which makes it relatively simple to compare actual data with expected results.
Executing every test for the entire system shouldn't take hours. Indeed, developers will more consistently run tests that execute quickly. Without regularly running the full set of tests, it will be difficult to validate the entire system when changes are made. Errors will start to creep back in, and the benefits of unit testing will be lost. This means stress tests and load tests for single classes or small frameworks of classes shouldn't be run as part of the unit test suite; they should be executed separately.
Allowing TestSuite to populate itself with test cases using reflection reduces maintenance time. Reflection ensures that you don't need to update the suite() implementation whenever a new test is added.
It is important to build a test case for the entire system. If one test case exercises the whole system, then developers can test the impact their changes will have on every class in the system. This increases the chance of errors resulting from unanticipated side effects being caught earlier. Without a universal test case, developers tend to test only the class they have modified. Also, running all the tests for the system becomes a painstaking manual process.suite() method, which would add all test cases defined in the system to a TestSuite. This test suite would then be returned from the suite() method. If you had many test cases, building such a test suite would be time-consuming. In addition, you would have to update the universal test case when new test cases were added or existing test cases were renamed or deleted. Instead of manually building and maintaining the test suite, build a test case that automatically builds a TestSuite from all of your system's test cases. Here is an outline of the requirements for such a test case:
TestCases that are meant to be subclasses, and not directly executed.
UnitTest, StressTest, LoadTest, and so on. However, this would make test case classes difficult to reuse between test types, because the test type decision is made near the root of the inheritance hierarchy; it should be made at each leaf instead. As an alternative, we can distinguish tests using a field: public static final String TEST_ALL_TEST_TYPE. Test cases will be loaded if they have this field declared with a value matching a string that the automatic test case has been configured with. To build this, we'll implement three classes:
ClassFinder recursively searches a directory tree for classfiles. Each classfile is loaded and the class's full class name is extracted. That class name is added to a list for later loading.
TestCaseLoader loads each class in the list found by ClassFinder and determines if it is a test case. If it is, it is added to a list.
TestAll is a subclass of TestCase with an implementation of suite() that will load in a set of test cases by TestCaseLoader.
ClassFinder locates the classes within the system to be tested. It is constructed with the directory that holds the system's classes. ClassFinder then finds all the classes in the directory tree and stores them for later use. The first part of ClassFinder's implementation is below:
public class ClassFinder {
// The cumulative list of classes found.
final private Vector classNameList = new Vector ();
/**
* Find all classes stored in classfiles in classPathRoot
* Inner classes are not supported.
*/
public ClassFinder(final File classPathRoot) throws IOException {
findAndStoreTestClasses (classPathRoot);
}
/**
* Recursive method that adds all class names related to classfiles it finds in
* the currentDirectory (and below).
*/
private void findAndStoreTestClasses (final File currentDirectory) throws IOException {
String files[] = currentDirectory.list();
for(int i = 0;i < files.length;i++) {
File file = new File(currentDirectory, files[i]);
String fileBase = file.getName ();
int idx = fileBase.indexOf(".class");
final int CLASS_EXTENSION_LENGTH = 6;
if(idx != -1 && (fileBase.length() - idx) == CLASS_EXTENSION_LENGTH) {
JcfClassInputStream inputStream = new JcfClassInputStream(new FileInputStream (file));
JcfClassFile classFile = new JcfClassFile (inputStream);
System.out.println ("Processing: " + classFile.getFullName ().replace ('/','.'));
classNameList.add (classFile.getFullName ().replace ('/','.'));
} else if(file.isDirectory()) {
findAndStoreTestClasses (file);
}
}
}
/**
* Return an iterator over the collection of classnames (Strings)
*/
public Iterator getClasses () {
return classNameList.iterator ();
}
}
TestCaseLoader finds the test cases among the class names from ClassFinder. This code snippet shows the top-level method for adding a class that represents a TestCase to the list of test cases:
public class TestCaseLoader {
final private Vector classList = new Vector ();
final private String requiredType;
/**
* Adds testCaseClass to the list of classdes
* if the class is a test case we wish to load. Calls
* shouldLoadTestCase () to determine that.
*/
private void addClassIfTestCase (final Class testCaseClass) {
if (shouldAddTestCase (testCaseClass)) {
classList.add (testCaseClass);
}
}
/**
* Determine if we should load this test case. Calls isATestCaseOfTheCorrectType
* to determine if the test case should be
* added to the class list.
*/
private boolean shouldAddTestCase (final Class testCaseClass) {
return isATestCaseOfTheCorrectType (testCaseClass);
}
isATestCaseOfTheCorrectType() method, listed below. For each class being considered, it:
TestCase. If not, it is not a test case.
public final static TEST_ALL_TEST_TYPE has a value matching that specified in the member field requiredType.
private boolean isATestCaseOfTheCorrectType (final Class testCaseClass) {
boolean isOfTheCorrectType = false;
if (TestCase.class.isAssignableFrom(testCaseClass)) {
try {
Field testAllIgnoreThisField = testCaseClass.getDeclaredField("TEST_ALL_TEST_TYPE");
final int EXPECTED_MODIFIERS = Modifier.STATIC | Modifier.PUBLIC | Modifier.FINAL;
if (((testAllIgnoreThisField.getModifiers() & EXPECTED_MODIFIERS) != EXPECTED_MODIFIERS) ||
(testAllIgnoreThisField.getType() != String.class)) {
throw new IllegalArgumentException ("TEST_ALL_TEST_TYPE should be static private final String");
}
String testType = (String)testAllIgnoreThisField.get(testCaseClass);
isOfTheCorrectType = requiredType.equals (testType);
} catch (NoSuchFieldException e) {
} catch (IllegalAccessException e) {
throw new IllegalArgumentException ("The field " + testCaseClass.getName () + ".TEST_ALL_TEST_TYPE is not accessible.");
}
}
return isOfTheCorrectType;
}
loadTestCases() method examines each class name. It loads the class (if it can be loaded); if the class is a test case and of the required type, the method adds the class to its list of test cases:
public void loadTestCases (final Iterator classNamesIterator) {
while (classNamesIterator.hasNext ()) {
String className = (String)classNamesIterator.next ();
try {
Class candidateClass = Class.forName (className);
addClassIfTestCase (candidateClass);
} catch (ClassNotFoundException e) {
System.err.println ("Cannot load class: " + className);
}
}
}
/**
* Construct this instance. Load all the test cases possible that derive
* from baseClass and cannot be ignored.
* @param classNamesIterator An iterator over a collection of fully qualified class names
*/
public TestCaseLoader(final String requiredType) {
if (requiredType == null) throw new IllegalArgumentException ("requiredType is null");
this.requiredType = requiredType;
}
/**
* Obtain an iterator over the collection of test case classes loaded by loadTestCases
*/
public Iterator getClasses () {
return classList.iterator ();
}
TestCall pulls everything together. It uses the aforementioned classes to build a list of test cases defined in the system. It adds those test cases to a TestSuite and returns the TestSuite as part of its implementation of the suite() method. The result: a test case that automatically extracts every defined test case in the system, ready for execution by JUnit.
public class TestAll extends TestCase {
addAllTests() method iterates over the classes loaded by the TestCaseLoader and adds them to the test suite:
private static int addAllTests(final TestSuite suite, final Iterator classIterator)
throws java.io.IOException {
int testClassCount = 0;
while (classIterator.hasNext ()) {
Class testCaseClass = (Class)classIterator.next ();
suite.addTest (new TestSuite (testCaseClass));
System.out.println ("Loaded test case: " + testCaseClass.getName ());
testClassCount++;
}
return testClassCount;
}
suite(), the test cases are added to the TestSuite, then returned to JUnit for execution. It obtains, from the system property "class_root", the directory where the classes are stored. It obtains, from the system property "test_type", the type of test cases to load. It uses the ClassFinder to find all the classes, and the TestCaseLoader to load all the appropriate test cases. It then adds these to a new TestSuite:
public static Test suite()
throws Throwable {
try {
String classRootString = System.getProperty("class_root");
if (classRootString == null) throw new IllegalArgumentException ("System property class_root must be set.");
String testType = System.getProperty("test_type");
if (testType == null) throw new IllegalArgumentException ("System property test_type must be set.");
File classRoot = new File(classRootString);
ClassFinder classFinder = new ClassFinder (classRoot);
TestCaseLoader testCaseLoader = new TestCaseLoader (testType);
testCaseLoader.loadTestCases (classFinder.getClasses ());
TestSuite suite = new TestSuite();
int numberOfTests = addAllTests (suite, testCaseLoader.getClasses ());
System.out.println("Number of test classes found: " + numberOfTests);
return suite;
} catch (Throwable t) {
// This ensures we have extra information. Otherwise we get a "Could not invoke the suite method." message.
t.printStackTrace ();
throw t;
}
}
/**
* Basic constructor - called by the test runners.
*/
public TestAll(String s) {
super(s);
}
}
java -cp C:\project\classes;C:\junit3.2\junit.jar:C:\jcf\jcfutils.zip -Dclass_root=C:\project\classes -Dtest_type=UNIT junit.ui.TestRunner bp.TestAll
UNIT that have classes stored under C:\project\classes.
You'll want to guarantee the status of supposedly thread-safe classes by testing them. Such tests prove difficult using Junit 3.2's existing set of facilities. You can use junit.extensions.ActiveTest to run a test case in a different thread. However, TestSuite assumes that a test case is complete when it returns from run(); with junit.extensions.ActiveTest, it is not. We could work hard to define a properly working ActiveTestSuite; instead, let's look at a simpler solution: MultiThreadedTestCase. First, I'll show how MultiThreadedTestCase assists with multithreaded testing. Then I'll show how MultiThreadedTestCase is implemented.MultiThreadedTestCase, we implement the standard elements of a TestCase, but we derive from MultiThreadedTestCase. The standard elements are the class declaration, the constructor, and since we're using TestAll, the definition of the test type:
public class MTTest extends MultiThreadedTestCase {
/**
* Basic constructor - called by the test runners.
*/
public MTTest(String s) {
super (s);
}
public static final String TEST_ALL_TEST_TYPE = "UNIT";
public void testMTExample ()
{
// Create 100 threads containing the test case.
TestCaseRunnable tct [] = new TestCaseRunnable [100];
for (int i = 0; i < tct.length; i++)
{
tct[i] = new TestCaseRunnable () {
public void runTestCase () {
assert (true);
}
};
}
// Run the 100 threads, wait for them to complete and return the results to JUnit.
runTestCaseRunnables (tct);
}
}
MultiThreadedTestCase, I'll examine the implementation. First, we declare the class and add an array where the running threads will be stored:
public class MultiThreadedTestCase extends TestCase {
/**
* The threads that are executing.
*/
private Thread threads[] = null;
testResult, seen below, holds the testResult that declares that the test case's run() will be passed. We override run() so we can store the testResult for later population by the test threads:
/**
* The tests TestResult.
*/
private TestResult testResult = null;
/**
* Simple constructor.
*/
public MultiThreadedTestCase(final String s) {
super(s);
}
/**
* Override run so we can save the test result.
*/
public void run(final TestResult result) {
testResult = result;
super.run(result);
testResult = null;
runTestCaseRunnables() runs each TestCaseRunnable in a seperate thread. All the threads are created and then started at the same time. The method waits until every thread has finished and then returns:
protected void runTestCaseRunnables (final TestCaseRunnable[] runnables) {
if(runnables == null) {
throw new IllegalArgumentException("runnables is null");
}
threads = new Thread[runnables.length];
for(int i = 0;i < threads.length;i++) {
threads[i] = new Thread(runnables[i]);
}
for(int i = 0;i < threads.length;i++) {
threads[i].start();
}
try {
for(int i = 0;i < threads.length;i++) {
threads[i].join();
}
}
catch(InterruptedException ignore) {
System.out.println("Thread join interrupted.");
}
threads = null;
}
testResult instance we saved from the run() method. handleException(), below, does just that:
/**
* Handle an exception. Since multiple threads won't have their
* exceptions caught the threads must manually catch them and call
* handleException().
* @param t Exception to handle.*/
private void handleException(final Throwable t) {
synchronized(testResult) {
if(t instanceof AssertionFailedError) {
testResult.addFailure(this, (AssertionFailedError)t);
}
else {
testResult.addError(this, t);
}
}
}
runTestCase()) where thrown exceptions will be caught and passed to JUnit. The implementation of this class is:
/**
* A test case thread. Override runTestCase () and define
* behaviour of test in there.*/
protected abstract class TestCaseRunnable implements Runnable {
/**
* Override this to define the test*/
public abstract void runTestCase()
throws Throwable;
/**
* Run the test in an environment where
* we can handle the exceptions generated by the test method.*/
public void run() {
try {
runTestCase();
}
catch(Throwable t) /* Any other exception we handle and then we interrupt the other threads.*/ {
handleException(t);
interruptThreads();
}
}
}
}
Using JUnit to develop robust tests takes some practice (as does writing tests). This article contains a number of techniques for improving your tests' usefulness. Those techniques range from avoiding basic mistakes (such as not using setUp()) to more design-level issues (avoiding intertest coupling). I've covered some basic ideas to help you use JUnit to test parts of your UI or Web application. I've also shown how to build an automated test suite that removes the overhead of maintaining hand-coded test suites and a mechanism for reducing the effort of developing multithreaded JUnit test cases.
Andy Schneider is a technical architect for BJSS. He has been using object technology since 1988 to build both large- and small-scale systems. Schneider has been using xUnit in projects for over 18 months. His interests include distributed architectures and development processes. Resources
http://www.javaworld.com/jw-12-2000/junit/jw-1221-junit.zip
http://www.javaworld.com/javaworld/topicalindex/jw-ti-tools.html
http://forums.itworld.com/webx?14@@.ee6b806
http://www.idg.net/jw-subscribe
http://www.junit.org
http://www.xprogramming.com/software.htm
http://c2.com/cgi-bin/wiki?UnitTests
http://c2.com/cgi-bin/wiki?ExtremeProgrammingRoadmap
http://www.xp123.com/xplor/xp0001/index.shtml